Hyundai Tucson manuels

Hyundai Santa Cruz 2021-2022 Owners Manual: Blind-Spot Collision-Avoidance Assist Settings

Setting features

Blind-Spot Safety

With the engine on, select 'Driver > Blind-Spot Safety' from the Settings menu to set whether to use each function.

- If ‘Active Assist’ is selected, Blind-Spot Collision-Avoidance Assist will warn the driver with a warning message, an audible warning and braking assist will be applied depending on the collision risk levels.
- If ‘Warning Only’ is selected, Blind- Spot Collision-Avoidance Assist will warn the driver with a warning message and an audible warning depending on the collision risk levels. Braking will not be assisted.
- If ‘Off’ is selected, Blind-Spot Collision-Avoidance Assist turns off.

When the engine is restarted with Blind- Spot Collision-Avoidance Assist off, the ‘Blind-Spot Safety System is Off’ message appears on the cluster.

If you change the setting from ‘Off’ to ‘Active Assist’ or ‘Warning Only’, the warning light on the side view mirror blinks for three seconds.

In addition, if the engine is turned on, when Blind-Spot Collision-Avoidance Assist is set to ‘Active Assist’ or ‘Warning Only’, the warning light on the side view mirror blinks for three seconds.

WARNING

Information

If the engine is restarted, Blind-Spot Collision-Avoidance Assist will maintain the last setting.

Warning Timing

With the engine on, select 'Driver Assistance > Warning Timing' from the Settings menu to change the initial warning activation time for Blind-Spot Collision-Avoidance Assist.

When the vehicle is first delivered, Warning Timing is set to ‘Normal’. If you change the Warning Timing, the Warning Timing of other Driver Assistance systems may change.

Warning Volume

With the engine on, select 'Driver Assistance > Warning Volume' from the Settings menu to change the Warning Volume to ‘High’, ‘Medium’ or ‘Low’ for Blind-Spot Collision-Avoidance Assist.

If you change the Warning Volume, the Warning Volume of other Driver Assistance systems may change.

CAUTION

Blind-Spot Collision-Avoidance Assist (BCA)
Blind-Spot Collision-Avoidance Assist is designed to help detect and monitor approaching vehicles in the driver’s blind spot area and warn the driver of a possible collision with a warning mess ...

Blind-Spot Collision-Avoidance Assist Operation
Warning and control Vehicle Detection To warn the driver a vehicle is detected, the warning light on the side view mirror illuminates. Blind-Spot Collision-Avoidance Assist operates when you ...

Autres materiaux:

ÉLECTROVANNE DE COMMANDE DE PURGE (PCSV)
Description et fonctionnement Description L'électrovanne de commande de purge (PCSV) est installée sur le réservoir d'expansion et contrôle le passage entre le canister et le collecteur d'admission. C'est une électrovanne ouverte quand l'ECM met à la ...

Poignée extérieur de porte avant
Composants et emplacement des composants EMPLACEMENT DES COMPOSANTS 1. Poignée extérieure de porte avant Procédures de réparation REMPLACEMENT 1. Retirez l'orifice de la fiche (B). 2. ...

© 2016-2022 Kopyright www.htumanuel.com