Hyundai Tucson manuels

Hyundai Santa Cruz 2021-2022 Owners Manual: Recommended Lubricants and Capacities

To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality. The correct lubricants also help promote engine efficiency that results in improved fuel economy. These lubricants and fluids are recommended for use in your vehicle.

Recommended SAE Viscosity Number

CAUTION

Always be sure to clean the area around any filler plug, drain plug, or dipstick before checking or draining any lubricant. This is especially important in dusty or sandy areas and when the vehicle is used on unpaved roads. Cleaning the plug and dipstick areas will prevent dirt and grit from entering the engine and other mechanisms that could be damaged.

Engine oil viscosity (thickness) has an effect on fuel economy and cold weather operating (engine start and engine oil flowability). Lower viscosity engine oils can provide better fuel economy and cold weather performance, however, higher viscosity engine oils are required for satisfactory lubrication in hot weather. Using oils of any viscosity other than those recommended could result in engine damage.

When choosing an oil, consider the range of temperature your vehicle will be operated in before the next oil change. Proceed to select the recommended oil viscosity from the chart.

Requires <API SN PLUS (or above) Full synthetic> grade engine oil. If a lower grade engine oil (mineral oil including Semi-synthetic) is used, then the engine oil and engine oil filter must be replaced as indicated for severe maintenance condition.

Gross Vehicle Weight
...

Vehicle Identification Number (VIN)
The VIN is also on a plate attached to the top of the left side dashboard. The number on the plate can easily be seen through the windshield from outside. ...

Autres materiaux:

Steering Wheel Remote Controls
NOTICE Do not operate multiple audio remote control buttons simultaneously. Rotate the VOLUME scroll up to increase volume. Rotate the VOLUME scroll down to decrease volume. If the SEEK/PRESET switch is pressed up or down and held for 0.8 second or more, it will function in the followi ...

Description et fonctionnement
Description Le capteur de pression absolue du collecteur (MAPS) est un capteur de densité de vitesse et est installé sur le réservoir d'équilibre. Il détecte la pression absolue dans le réservoir d'équilibre et transfère le signal analogique proportionnellement ...

© 2016-2022 Kopyright www.htumanuel.com