Hyundai Santa Cruz 2021-2022 Owners Manual: Sidewall Side Storage
Opening/Closing sidewall side
storage

Turn the two knobs to open/close the lid
Power Outlet

Power outlet is located in the passenger
side sidewall side storage bin.
To use the power outlet
1. Turn the two knobs to the left to open
the lid.
2. Open the cover and plug in the
appliance slightly.
CAUTION
- Do not use the power outlet for
electrical appliances that require
high initial peak wattage, such as
cathode-ray tube type televisions,
refrigerators, electric pumps,
etc. It is not suitable for devices
that process precise data, such as
medical equipment, and that require
an extremely stable power supply,
such as microcomputer-controlled
electric blankets, touch sensor
lamps, etc.
- When the power outlet is not in use,
close the cover to prevent any small
foreign objects from getting into the
power outlet.
WARNING
- Continued use of any electrical
appliance/device exceeding these
ratings may result in damage to the
appliance/device.
- Make sure that no moisture is
trapped in a bin when closed to
prevent mold growth.
The underbed storage area is water
resistant and can be locked and unlocked
using the remote key or smart key.
Opening underbed storage
The underbed storage can be unlocked
and opened by the follo ...
Tie Down Locations
[A] Fixed Tie Down
[B] D-Ring
You can secure cargo to the vehicle using
hooks, ropes and straps with heavy duty
tie downs from various location on the
pickup bed.
Fixed Tie Do ...
Autres materiaux:
Description et fonctionnement
Description
Ces spécifications s'appliquent à HCU (Unité de commande hydraulique) et ECU
(Unité de commande électronique) de HECU. (Unité de commande hydraulique et
électronique)
Ces spécifications s'appliquent au dessin des câblages et à l'installatio ...
Vérification du niveau de liquide de refroidissement
Vérifiez l'état et les branchements de tous les flexibles du système de refroidissement
et du chauffage. Remplacez les flexibles détériorés ou gonflés.
Lorsque le moteur est froid, le niveau du liquide de refroidissement doit se
situer entre les repères MAX et MIN du réservoir. ...