Hyundai Tucson manuels

Hyundai Santa Cruz 2021-2022 Owners Manual: Tilt / Telescopic Steering

When adjusting the steering wheel to a comfortable position, adjust the steering wheel so that it points toward your chest, not toward your face. Make sure you can see the instrument cluster warning lights and gauges. After adjusting, push the steering wheel both up and down to be certain it is locked in position.

Always adjust the position of the steering wheel before driving.


NEVER adjust the steering wheel while driving. This may cause loss of vehicle control resulting in an accident.

To adjust the steering wheel angle and height:

1. Pull down the lock-release lever (1).

2. Adjust the steering wheel to the desired angle (2) and distance forward/back (3).

3. Pull up the lock-release lever to lock the steering wheel in place.


While adjusting the steering wheel angle and height, please do not push or pull it hard since the fixture can be damaged.


Sometimes the lock release lever may not engage completely. This may occur when the gears of the locking mechanism do not completely mesh. If this occurs, pull down on the lock-release lever, readjust the steering wheel again, and then pull back up on the release lever to lock the steering wheel in place.

Steering Wheel
Electric Power Steering (EPS) The electric power steering system assists you with steering the vehicle. If the vehicle is turned off or if the power steering system becomes inoperative, you may st ...

Heated Steering Wheel
When the ignition switch is in the ON position or when the engine is running, press the heated steering wheel button to warm the steering wheel. The indicator on the button will illuminate. To tu ...

Autres materiaux:

Composants et emplacement des composants
emplacement des composants 1. RESERVOIR CARBURANT 2. Pompe à carburant 3. FILTRE CARBURANT 4. Régulateur de pression du carburant 5. Canister 6. Filtre à air du réservoir de carburant 7. Capteur de pression de carburant 8. Module de commande ...

Procédures de réparation
DÉPOSE 1. Après avoir fait un repère sur la bride de fourchette et la boîte de vitesses d’accompagnement, déposez les boulons de fixation de l’arbre de transmission (A). Couple de serrage: 49,0 ~ 68,6 N.m (5,0 ...

© 2016-2022 Kopyright