Hyundai Santa Cruz 2021-2022 Owners Manual: TPMS Malfunction Indicator
.gif)
The TPMS Malfunction Indicator will illuminate after it blinks for approximately one minute when there is a problem with the Tire Pressure Monitoring System.
Have the system checked by an authorized HYUNDAI dealer as soon as possible.
NOTICE
If there is a malfunction with the TPMS, the individual tire pressures in the cluster LCD display will not be available. Have the system checked by an authorized HYUNDAI dealer as soon as possible.
NOTICE
The TPMS Malfunction Indicator may illuminate after blinking for one minute if the vehicle is near electric power supply cables or radio transmitters such as police stations, government and public offices, broadcasting stations, military installations, airports, transmitting towers, etc.
Additionally, the TPMS Malfunction Indicator may illuminate if snow chains are used or electronic devices such as computers, chargers, remote starters, navigation, etc. This may interfere with normal operation of the TPMS.
Low Tire Pressure
Warning Light. Low Tire Pressure Position and
Tire Pressure Display
Low Tire Pressure
Warning Light
Low Tire Pressure Position and
Tire Pressure Display
When the tire pressure monitoring
system warning indicators are
illuminated and a warning message
displayed ...
Changing a Tire with TPMS
If you have a flat tire, the Low Tire
Pressure and Position telltales will come
on. Have the flat tire repaired by an
authorized HYUNDAI dealer as soon as
possible or replace the flat tire with th ...
Autres materiaux:
High Mounted Stop Lamp
and Top Mounted Bed Lamp
/ Side Mounted Bed Lamp
Replacement
[A] : High Mounted Stop Lamp
[B] : Top Mounted Bed Lamp
If the LED light source does not operate,
have the system be inspected by an
authorized HYUNDAI dealer.
The LED light source cannot be
replaced as a single unit because it is
an integrated part of the lamp. The LED
lamp has to be replaced ...
À actionneur de commande du mode
Composants et emplacement des composants
emplacement des composants
1. Actionneur de commande du
mode
Description et fonctionnement
Description
L′actionneur de commande de mode est placé sur l′unité de chauffage.
Il règle ...