Hyundai Santa Cruz 2021-2023 Owners Manual: License Plate Lamp Replacement
.jpg)
1. Using flat-blade screwdriver, gently pry on the inside edge of the lamp housing, compressing the metal clip on the opposite side. Once clip is compressed, lamp will rotate out of location in bumper.
2. Remove Bulb by rotating bulb in the direction indicated on holder.
3. Remove bulb from holder by pulling it straight out.
4. Install a new bulb.
5. Reinstall the lamp by compressing the clip in the bumper and rotating the lamp to hook the housing back into place on the bumper.
High Mounted Stop Lamp
and Top Mounted Bed Lamp
/ Side Mounted Bed Lamp
Replacement
[A] : High Mounted Stop Lamp
[B] : Top Mounted Bed Lamp
If the LED light source does not operate,
have the system be inspected by an
authorized HYUNDAI dealer.
The LED light source cannot be
repla ...
Interior light replacement
Map/Rear lamp (LED)
If the LED lamp does not operate,
have the system be inspected by an
authorized HYUNDAI dealer.
The LED lamps cannot be replaced as
a single unit because it is an integrated
u ...
Autres materiaux:
Jauge de niveau d'huile & tuyau: Procédures de réparation
Dépose et pose
1.
Déposez la jauge de niveau d'huile (A).
2.
Pour la pose, suivez la procédure inverse de la dépose.
...
Blind-Spot View Monitor (BVM)
Blind-Spot View Monitor displays the
rear blind spot area of the vehicle in the
cluster when the turn signal is turned on
to help change lanes.
Detecting sensor
[1], [2] : Surround-side view camera
(camera located at bottom of the mirror)
Refer to the picture above for the
detailed location o ...