Hyundai Santa Cruz 2021-2023 Owners Manual: Navigation-based Smart Cruise Control Operation

Operating conditions

Navigation-based Smart Cruise Control is ready to operate if all of the following conditions are satisfied:

• Smart Cruise Control is operating
• Driving on main roads of highways

Information

For more details on how to operate Smart Cruise Control, refer to “Smart Cruise Control (SCC)” section in chapter 7.

Navigation-based Smart Cruise Control display and control

When Navigation-based Smart Cruise Control operates, it is displayed on the cluster as follows:

• Navigation-based Smart Cruise Control standby

If the operating conditions are satisfied, the white symbol illuminates.

• Navigation-based Smart Cruise Control operating

If temporary deceleration is required in the standby state and Navigation-based Smart Cruise Control is operating, the green symbol illuminates on the cluster.

If the Highway Auto Speed Change function operates, the symbol and set speed illuminates in green on the cluster, and an audible warning sounds.

WARNING

‘Drive carefully’ warning message appears in the following circumstances:

- Navigation-based Smart Cruise Control is not able to slow down your vehicle to a safe speed

Information

Highway Auto Curve Slowdown and Highway Auto Speed Change function uses the same symbol.

Highway Auto Curve Slowdown

• Depending on the curve ahead on the highway, the vehicle will decelerate, and after passing the curve, the vehicle will accelerate to Smart Cruise Control set speed.
• Vehicle deceleration time may differ depending on the vehicle speed and the degree of the curve on the road. The higher the driving speed, deceleration will start faster.

Highway Auto Speed Change

• Highway Auto Speed Change function will operate when Smart Cruise Control set speed and the highway speed limit is matched.
• While Highway Auto Speed Change function is operating, when the highway speed limit changes, Smart Cruise Control set speed automatically changes to the changed speed limit.
• If Smart Cruise Control set speed is adjusted different from the speed limit, Highway Auto Speed Change function will be in the standby state.
• If Highway Auto Speed Change function has changed to the standby state by driving on a road other than the highway main road, Highway Auto Speed Change function will operate again when you drive on the main road again without setting the set speed.
• If Highway Auto Speed Change function has changed to the standby state by depressing the brake pedal or pressing the switch on the steering wheel, press the switch to restart the function.
• Highway Auto Speed Change function does not operate on highway interchanges or junctions.

Information

• Highway Auto Speed Change function only operates based on the speed limits of the highway, it does not work with speed cameras.
• When Highway Auto Speed Change function is operating, the vehicle automatically accelerates or decelerates when the highway speed limit changes.
• The maximum set speed for Highway Auto Speed Change function is 86 mph (140 km/h).
• If the speed limit of a new road is not updated in the navigation, Highway Auto Speed Change function may not operate properly.
• If the speed unit is set to a unit other than the speed unit used in your country, Highway Auto Speed Change function may not operate properly.