Welcome system helps keep the driver visible by turning on vehicle lights when the driver approaches the vehicle.
Door Handle Lamp
When all the doors are closed and locked, the door handle lamp will turn on for approximately 15 seconds if any of the below is performed.
- the lamps will turn on when the
door lock button is pressed on the
smart key.
- the lamps will turn on when the
button of the outside door handle
is pressed with the smart key in
possession. (available with button
type)
- the lamps will turn on when the
touch sensor on the outside door
handle is touched with the smart
key in possession. (available with
touch sensor type)
You can activate or deactivate Welcome Light function from the User Settings mode on the LCD display.
Headlamp and position lamp
When the headlamp (lamp switch in the headlamp or AUTO position) is on and all doors (and tailgate) are locked and closed, the position lamp and headlamp will come on for 15 seconds when the door unlock button is pressed on the remote key or smart key.
At this time, if you press the door lock or unlock button, the position lamp and headlamp will turn off immediately.
Interior lamp
When the interior lamp switch is in the
position and all doors (and
tailgate)
are closed and locked, the room lamp
will come on for 30 seconds if any of the
below is performed.
Top mounted bed lamp and Side mounted bed lamp
Lamps will be activated when a button in cabin is pressed once. (Indicator on button will illuminate when lamps are on.) Or when underbed storage lid is opened.
Lamps will turn Off if any of the following occur:
NOTICE
Bed lamps can only be activated when vehicle is in Park (P) or Neutral (N) with the vehicle speed is below 3.1 mph (5 km/h).
Électrovanne de commande du convertisseur de couple (T/CON_VFS)
Description et fonctionnement
Description
•
L'électrovanne de commande du convertisseur de couple (T/CON_VFS) est
attachée au corps de la soupape.
•
Cette électrovanne variable commande indirectement la pression hydrauli ...
À module de commande du moteur (ECM)
Diagrammes schématiques
Borne ECM et signal d'entrée/sortie
[TM]
FONCTION DE BORNE DE L'ECM (M/T)
Conector [C200-MA]
N° de broche
Description
Branché Ã
1
Sortie de contrôle de lâ ...