Hyundai Tucson manuels

Hyundai Santa Cruz 2021-2022 Owners Manual: Wheel Replacement & Tire Traction & Tire Maintenance

Hyundai Santa Cruz 2021-2022 Owners Manual / Maintenance / Tires and Wheels / Wheel Replacement & Tire Traction & Tire Maintenance

Wheel Replacement

When replacing the metal wheels for any reason, make sure the new wheels are equivalent to the original factory units in diameter, rim width and offset.

Tire Traction

Tire traction can be reduced if you drive on worn tires, tires that are improperly inflated or on slippery road surfaces. Tires should be replaced when tread wear indicators appear. To reduce the possibility of losing control, slow down whenever there is rain, snow or ice on the road.

Tire Maintenance

In addition to proper inflation, correct wheel alignment helps to decrease tire wear. If you find a tire is worn unevenly, have your dealer check the wheel alignment. When you have new tires installed, make sure they are balanced. This will increase vehicle ride comfort and tire life. Additionally, a tire should always be rebalanced if it is removed from the wheel.

Tire Replacement
If the tire is worn evenly, a tread wear indicator will appear as a solid band across the tread. This shows there is less than 1/16 inch (1.6mm) of tread left on the tire. Replace the tire when ...

Tire Sidewall Labeling
This information identifies and describes the fundamental characteristics of the tire and also provides the tire identification number (TIN) for safety standard certification. The TIN can be used ...

Autres materiaux:

Composants et emplacement des composants
EMPLACEMENT DES COMPOSANTS 1. Interrupteur de la vitre électrique conducteur 2. Interrupteur de la vitre électrique passager 3. Interrupteur de la vitre électrique arrière 4. Moteur de la vitre avant 5. Moteur de la vitre arrière ...

Les essuie-glaces
Fonctionnent comme suit lorsque le contacteur d’allumage est sur ON. MIST : Pour n'effectuer qu'un seul cycle de balayage à l'aide des essuie-glaces, placez le levier dans cette position (embuage), puis relâchez-le. Si le levier est maintenu dans cette position, les essuieglaces ...

© 2016-2022 Kopyright www.htumanuel.com